ESD Mat
Technical Specification
- Governing Specifications : BS 2050 / 1978IS 3462 / 1986
- Material : Homogeneous composition with Black conductive layer sandwiched between two antistatic Layers.
- Thickness : 2mm +/-0.1mm (0.5mm sandwiched conductive layer)
- Tensile Strength : More than 25mj/m3 exceeds
- Flexibility : Does not break or show any Sign of Failure.
- Sound Reduction Factor : 3db for 2mm thickness.
- Inflammability : Self extinguishing as per RDSO C – 8515
- Water Absorption : At room temperature for 24 hrs is less than 0.1%.
- Heat Aging Exudation : No surface cracking or Exudation takes place, as per IS:3462-1986.
- Standard Supply : 2.0 Mtrs width x approx. 15 Mtrs Running length.
- Dimension Tolerance : +/-5%.
- Electrical Properties : Surface Resistivity : 108 – 1010 ohms / sq. Decay Time : Less than 2 seconds.
- Resistance to Chemicals : Offers above average resistance from mild and diluted acids & alkalis. The surface has to be cleaned immediately
is case concentrated acid or alkalis spill.
Installation
- Ensure sub floors are smooth, dry, clean & structurally sound.
- We recommend FEVICOL SR 998 / SR 505 or any equivalent rubber based adhesive for laying.
- For clean room conditions Thermo Welding is recommended.
Maintenance
- The surface should be cleaned daily with damp mop and weekly or fortnightly with Antistatic Floor Cleaners.
- To remove stubborn stains rub the affected area with coir brush or fine steel wool NO.000 soaked in warm soap solution. Use water to remove chemical spillage on the flooring.
- Do not throw lighted cigarette butts or match sticks on the floor.
- Avoid dragging heavy furniture or objects so as to avoid scratches on the floor.