Welcome to Sharang Corporation

BACK

Soldering & De-Soldering Systems

Sharang 609D Multi Functional Rework Station

	Easy to handle. Different types of Bits & Nozzles are available.
	Monitor bit temperature intelligently with perfect temperature offset to ensure soldering quality.
	With low temperature soldering process, the life of bit is secured.
	Optical isolation with zero volt switching.
	Feather touch system control with closed loop temp. monitoring.
	Temp setting resolution +/- 1° C with keys.

	High capacity through hole De-Soldering gun to handle your most demanding through hole requirements with finger activated vacuum.
	SMT Tweezer for quick and easy removal of chip components.
	Built in vacuum pickup hot air gun for safe and non contact SMD component removal or replacement.

Soldering Iron

SMT Tweezer

Power Consumption	80 W
Temperature Range	180 - 480°C
Temperature Stability	+/-1°C (w/o load)

Power Consumption	2x25 W
Temperature Range	180-400° C
Temperature Stability	+/- 10° C(w/o load)

De-Soldering Iron

Hot Air Gun

Power Consumption	65 W
Temperature Range	180-450° C
Temperature Stability	+/- 10° C(w/o load)

Power Consumption	200 W
Temperature Range	200-550° C
Temperature Stability	+/- 50° C(w/o load)

Console

Input Voltage	230 VAC, 50Hz
Output	24 VAC
Air Pump	2-24 LPM
Vacuum Pump	24 VDC, 8000 RPM Double Cylinder Pump Vacuum up to 650 mm/hg.
Weight	8.0 Kgs.

Tool Box : Soldering Tips 5 Nos, De-Soldering Nozzles 5 Nos, Fibre Filters 10 Nos, Solder collector
Gloss tube 1 No., Spanner 1 No., Cleaning Spring 1 No. Silicon Washer 2 Nos. SMT Tweezer Tips 01 Set. Hot Air Nozzles Single Hole 3 Nos. IC Lifter. Cleaning Sponge 2 Nos.



	ESD safe models are also optionally available.